Mélangeur continu (PTPC / PTSC)
Les mélangeurs continus (PTPC / PTSC) par PerMix, conçus sur mesure pour les applications de mélange de poudres, ils garantissent des performances de production fiables et une intégration optimale dans des lignes de traitement complètes.

Excellence en innovation - Performance - Qualité - Prix - Garantie
Le système en continu (PTPC / PTSC) fait partie de la gamme de mélangeurs de poudres PerMix. Chaque système est configuré sur mesure selon le produit du client, sa capacité, ses exigences d'hygiène et son flux de production, depuis les essais à l'échelle laboratoire jusqu'aux lignes industrielles complètes.
Qu'est-ce que le mélangeur continue (PTPC / PTSC)
Le mélangeur continu (PTPC / PTSC) est une solution de traitement industriel PerMix conçue pour offrir des performances fiables et répétables dans les mélangeurs de poudre. Elle est développée selon les exigences réelles de procédé de chaque client, plutôt qu'à partir d'une configuration fixe sur catalogue.
Mélangeur continu (PTPC / PTSC) - Sur le terrain
Des machines réelles, du travail réel. Cliquez sur une photo pour découvrir l’image en plein écran.
Vidéos
Mélangeur continu à socs PerMix PTSC avec barrage réglable (pour le réglage du temps de séjour)
Mélangeur continu à pales à double arbre PerMix PTPC-W-1000
Vidéo 3D des mélangeurs continus à double arbre PerMix PTPC-W
Mélangeur continu PerMix PTS/P C 80 avec possibilité de permuter entre socs et pales
PerMix PTPC 300
Continuous mixer FAQ
A continuous mixer meters raw materials in at one end of the mixing chamber and discharges a finished blend at the other, at the same time, under steady flow. PerMix builds its continuous mixers on proven batch paddle and plow technology:
- PTPC continuous paddle mixer: pitched paddles move more material per revolution than a typical ribbon
- PTSC continuous plow mixer: plowshare tools create three-dimensional turbulent movement
- PTPC-W-2 double-shaft continuous paddle mixer: twin shafts expand the active mixing zone for higher throughput
Each unit is configured around your product, throughput, residence time and sanitation needs, and can be tested on your formulation before production.
When should I choose a continuous mixer over a batch mixer?
A continuous mixer makes sense when daily tonnage is high, formulas stay stable for long runs, and the equipment before and after the mixer already runs continuously. If you run many SKUs with frequent changeovers, a batch mixer is usually the better fit.
Can a continuous mixer add liquids to dry powders?
Yes, when the mixer is specified with liquid injection points and the residence time is long enough for wetting and distribution. Rates should be confirmed with trials.
How is residence time controlled in a continuous mixer?
Feed rates, tool speed and an adjustable discharge dam set how long the material stays in the chamber. When these are tuned, continuous mixing can approach the uniformity of a well-run batch mixer without batch wait time.
What do I need to specify for a continuous mixer?
Target throughput (kg/h or t/h), bulk densities, the number of feeds and accuracy of minor components, required residence time, paddle or plow or twin-shaft layout, liquid addition, heating or cooling, dust containment and clean-out expectations.
Configurez votre mélangeur continu (PTPC / PTSC)
Partagez vos exigences de procédé et PerMix vous recommandera la configuration de machine adaptée à votre ligne.